Shrink Sleeve Applicator :-
The machine can run sleeves in roll form and is capable of applying full body sleeve or a sleeve at a particular location on the bottle. This canbe done by a specially designed attachment.
The steam tunnel comes immediately after the sleeving machine,which shrinks the label perfectly onto the bottle taking the shape of thecontainer without any creases. Steam is controlled economically by
controlled valves and can be directed at the label precisely.
Another option is a hot air system where steam is not available.
Machine is well guarded with interlocking door safeties.Interactive intelligence by means of a huge TFT Colour touch screen with all necessary alerts via real time clock & trouble shooting information.
The cutter is a very simple
mechanism with 5/6/8 blades,
these stainless steel blades are
specially made for this application.
The blades cut in a overlapping
rotary action , which is driven by a
servo motor. This is a change part
depending on the range of Bottle
The sleeve unwind and tension control is done by
means of idler and dancing roller which maintains the
web tension, the high/low position of the dancing
roller decides the label feed.
The mandrill is the most complex part of this
machine. The sleeve is opened by this floating
mandrill which has idle bearings to assists to drive
the cut label onto the bottle by means of dual high
speed motors. Mandrill is a change part for different
The machine setting for the mandrill support rollers, and
sleeve drive Rubber rollers are to be set for different sizes of
bottles and labels, this is done very quickly by means of
simple handwheel with ball guide screw, and LM linear
bearings, this can be done within a few seconds thus making
the change overs very easy and quick .Print mark sensor
position is marked for different bottles. All other settings are
from the control panel.