heavy duty shrink wrap machine:-

Multiple wrapping systems using LDPE Material with 2side opening for heavy cases. Operation of the System: 

The system consists of 2 units, one a wrapping unit that

is used to wrap the product with the shrink film and the second unit where the

shrinking of the product with the film takes place. The recommend models for your

application are AW-650 and S.W. 5045 H.D

The product to be wrapped will be placed in the base tray and fed into the

auto-wrapping machine. The bottles with the tray must be placed before the

pneumatic pusher arm. Once the product has been placed manually pusher pulse

has to be given manually. The tray with the bottles will fed into the machine for

sleeve wrapping over the product. And then the sealing pulse must be given. The

sealing takes place with the help of pneumatic system for which air supply has to be

provided. Shrinking of the film takes place at a set temperature and speed of travel.

Type of Collation: In Tray Pack with film.

Material of Packing: Shrinkable PE.

Heavy Duty Shrink Tunnel: SW-5045-H.D with Cooling Chamber

Sleeve Wrapper:

Sealing Length: 650mm

Sealing with cut facility suitable for LDPE material

Pneumatically operated sealing system

Air Pressure req. 6 Kg.sq/cm

M.O.C: In M.S Duly Powder Coated

Pneumatic film unwinding system will be provided

Two roll feeding system for Film

Timer based sealing, cooling

Power: 230V, 50Hz, 15 Amps

Sealing watts: 1.2 K.W

Rubber coated rollers with locking for film holding in top and bottom

Pusher: Pneumatic pusher works at 4-5Kg. pressure

Shrink Tunnel with Cooling Chamber:

Chamber Size: 500mm(W) x 450mm(H)

Hot Air Chamber Size: 500mm(W) X 450mm(H) X 1000mm(L)

Cooling Chamber: 500mm(W) X 450mm(H) X 400mm(L)

Machine Dimension: 1000mm(W) X 1000mm(H) X 2000mm(L)

Conveyor: Roller type

Conveyor Drive: 1 H.P Variable Speed Drive, A.C Drive

Heavy Duty chains with pins for conveyor assembly.

Heater: 12 K.W Open type Porcelain heaters for better efficiency and

Faster heating.

Digital Temperature controller with sensor to control the chamber temperature

With PID Controller system

Hot Air Blower: High velocity with ‘F’ class insulation, ¼ H.P

Cooling Fan: 200-Watts capacity

Heavy Duty Gear box with the motor

Separate indicator for Input lines, Blower, Cooling fan, and Motor

Interlocking system between the controls for safety reasons.

Insulation: double class, Padded Glass Wool insulation for better heat insulation.

Aluminum Heat resistant coating for the Hot Air Chamber.

M.O.C: In Mild Steel duly Powder Coated

Power: 440V, 50Hz, 3 Phase